Can Your Raymond Mill Handle Quartz?

Raymond Mill and its Applicable Materials

Raymond mill is one of the most common milling equipments, is one of the oldest equipment. After many years of development and improvement, Raymond Mill equipment has become a grinding mill well-known by customers. But many customers not very familiar with the material of Raymond Mill. They ask me that whether Raymond Mill can process quartz, if Raymond Mill can process marble, and what about barite and calcite? I describe the materials and features of Raymond mill in this article. Raymond mill is mainly used in micro powder making of barite, calcite, potassium feldspar, talc, gypsum, marble, limestone, dolomite, fluorite, lime, activated clay, medical stone, bauxite, iron oxide, iron ore, activated carbon, bentonite, kaolin, cement, phosphate rock, gypsum, glass, bluestone, petroleum coke and chemical raw materials. The Mohs hardness of non-flammable mineral is not more than 9.3, humidity less than 6%, and there are 280 kinds in total. Discharging granularity of Raymond mill is 80-325mesh, through the common role of analytical engine and the fan, to meet the requirements of different users.

Structural Characteristics of Raymond Mill

1.Raymond Mill has three-dimensional structure, covers a small area, has nature of complete set, is a separate production system from the block to the finished product powder.

2.Fineness of finished powder is uniform, passing rate is 99%, which is difficult to other milling equipment.

3.Host transmission of the milling machine uses a closed gear box and pulley, having smooth transmission and reliable operation.

4.Important components of Raymond mill are made of high-quality steel, wear-resistant pieces are high-performance wear-resistant materials, the whole host has wear-resistant high-performance, reliable operation.

5.the electrical system is with centralized control, milling plant can be basically unattended operation, and easy maintenance.

Shanghai Clirik supply you with good quality and high-efficiency Raymond Mill, welcome to your inquiry!

http://www.raymondmill.in/news/103.html

Related Websites:

http://www.crusher-plant.net/

http://www.sand-making.net/

http://stonemill.ru/

Abnormal Processing of Magnesium Oxide Ball Mill

Classification of Ball Mill

Ball mill is one of the high-fine grinding machineries which are widely used in industrial powder production, it has many types, such as tubular ball mill, rod mill, cement mill, ultra-fine laminated mill, hand ball mill, horizontal ball mill, bearing ball mill, energy-saving ball mill, overflow type ball mill, ceramic ball mill, lattice ball mill. Ball mill is applicable to grinding a variety of minerals and other materials, are widely used in mineral processing, building materials and chemical industries, can be divided into dry and wet grinding two ways. According to different ways of discharge, it's devided into sub-lattice-type and overflow type; according to the cylinder shape it can be divided into short tube ball mill, long tube ball mill, tube mill and conical mill; according to the different grinding media, the ball mill can be divided into steel ball ball mill, ceramic ball mill (magnesium oxide ball mill).

Abnormal Treatment of Magnesium Oxide Ball Mill

Magnesium oxide ball mill is a very common type of ball mill, there are often some unexpected situations in the process of it, so here we give some solutions:

1.in operation of ball mill, if it appears that ball mill cover screw loose and leakage of slurry, it should be immediately stoped, reinforce the screws of ball mill cap, and rebegin it. This is to prevent the ball mill cover, screw loose and fly out of wounding, as well as mud, ball stone spray wounding.

2.If the electric hoist wire rope stuck, you must immediately stop it, hang safety warning card on the electric control cabinet, and repair ball mill before operation.

3.If the ball mill tilt, "Wipe Wall": Check the bearings and large bearing seat level after shutdown, if necessary, to replace and adjust the bearing.

4.Oil in Fluid Coupler sprays: immediate shutdown, please repair your ball mill. The safety hole must be filled with a fusible alloy and no other metal is allowed.

Supplying you with different ball mills with good quality and reasonable price, Shanghai Clirik Machinery is a reliable manufacturer. Welcome to Shanghai Clirik!

http://www.raymondmill.in/news/102.html

Related Websites:

http://www.mill-grinding.com/

http://www.clirik-mill.com/

http://www.powder-grinder.com/

http://www.ballmillsupplier.com/

How to Deal With the Common Faults of Raymond Mill

We all know that the Raymond mill is one of the common mining equipments. It is widely used in processing materials include quartz, feldspar, barite, calcite carbonate, limestone, talc, ceramic, iron ore, carborundum, bauxite, rock phosphate, coal and other materials, about 400 kinds of materials in total. The granularity of the finished powder size can be adjusted between 50 and 425 mesh. When we are using the Raymond mill it will appear some minor problems sometimes, and then how to solve these problems in our production process? Clirik will share some methods with you.

Question 1: The bearing damage of Raymond mill
Reason: Lack of oil, or seal damage. The lack of maintenance and cleaning in a long time.
Remedy: According to the provisions time to refuel. Clean the machine regularly, replace the oil seal.

Question 2: There is no powder or less powder in Raymond mill
Reason: The lock powder device is not adjusted well, sealing lax. Or, the wear of blade, can not afford the materials.
Remedy: Check and adjust the lock powder device. And replace the blade in time.

Question 3: There will appear the phenomenon of current rise in Raymond mill host
Reason: Feed too much, the air duct is plugged by the powder, pipe is poor exhaust, circulating air make the main current too large, so the whole set machine temperature is rising.
Remedy: Reduce the amount of feed, remove the duct powder. Open the duct valve, and control the machine material temperature at 6 ℃ or less.

Question 4: The host of Raymond mill have a large noise and vibration
Reason: The feed volume is small. And there is a serious wear and tear in blade, so that the blade cannot afford the materials. Or there is a high hardness material in the grinding mill, but there is no material layer. Or there is a serious deformation in the grinding roller and grinding ring.
Remedy: Adjust the feeding volume, replace a new blade. Change the size of feed particle. Replace the roller, grinding ring in time.

Shanghai Clirik Machinery is a professional Raymond mill manufacturer, if you have any question when you are in the processing of Raymond mill, please leave your question, then our technical engineers would contact you and solve your question.

http://www.raymondmill.in/news/101.html

Related Websites:

http://www.grinding-mill.in/

http://www.stone-mills.com/

http://www.ultra-mill.com/

http://www.grinding-equip.com/

There Are Some Methods Could Increase The Output of Raymond Mill

We will meet lots of problems when we are using the Raymond mill, but we also can solve some problems by using some methods. For example, if we want to increase the capacity of our Raymod mill, we can use these methods. Clirik will teach you in the following.

If we want to increase the output of the Raymond mill, we must find the troubles which cause the low capacity of raymond mill. There are mainly these problems:

1. Hyoplastron in the Raymond mill is not locked close.
2. There are too much wear on the grinding roller and grinding ring, and the materials in the raymond mill are not grinded enough.
3. The lack of wind in the Raymond mill processing system will lead to the fineness of the finished product too fine, so that reducing the capacity
4. Because of the materials in the Raymond mill contains large amounts of water, so that it occurs the phenomenon of materials be blocked.
5.Material hardness is too large，so grinding material time becomes long
6. Users have a high requirement for the fineness of finished product, and it causes the reduction of the extraction rate

We can solve the trouble by using different methods, so that we can adjust the output of Raymond mill by ourself. Clirik had summarised some methods:

1. Close the tongue plate.
2. Replace the components of the machine in time.
3. Adjust wind rate system, grinding after materials are fully dried.
4. Choose the suitable materials for the machine, make grinding fineness in the range of Raymond mill.

Shanghai Clirik Machinery is a professional manufacturer of Raymond mill, if you want to know more about how to solve common problems by ourself. Or you are interested in our products, welcome to you leave your message on our website.

http://www.raymondmill.in/news/100.html

Related Websites:

http://www.stone-pulverizer.com/

http://www.calciumcarbonategrinding.com/

http://www.grindingmillsupplier.com/

http://www.micro-mill.org/

Pakistan Customers Come to Visit Our Barite Grinding Mill

Product: barite grinding mill
Raw Material: barite
Fineness of finish product: 200mesh
Capacity: 25t/h
Date: Feb. 09, 2017
Construction Site: Pakistan

Today, Shanghai Clirik had welcome two customers, they come from Pakistan. Although, today is snow, our sales manager Mr. Liu had trested them. Our customer said thad they need a barite grinding mill to process barite. They want to process barite into barite powder, and the finish fineness is 200 mesh, the capacity is 25t/h. These two friends said a lot about their mind, and manager Liu help them to solve their question. Finally, the customers are very glad and said that manager liu was really help them a lot.

Our position: Shanghai's Pudong New Area of Qing Fuqing road on the NO. 19
Our tel: 86-02120236178
Our official website: www.clirikchina.com 
Our E-mail: Sales@clirik.com

http://www.clirikchina.com/news/Group_News/171.html

Related Websites:

http://www.dolomitegrindingmill.com/

http://www.carbonblack-process.com/

http://www.raymond-mill.com/

http://www.grinding-plant.net/

Welcome Korea Customers to Visit Our Micro Powder Grinding Mill

Product: micro powder grinding mill
Raw Material: diatomaceous earth
Fineness of finish product: 800mesh
Capacity: 35t/h
Date: Feb. 09, 2017
Construction Site: Korea

Today, Shanghai is snow in the morning, however, there are five Korea customers come to our company to visit. They want to process diatomaceous earth, and they need micro powder grinding mill. Our sales manager Mr. Tan trested them. In the afternoon the sky turn bule, its sunny. They have a long talk today.

Introduction of our micro powder grinding mill:

We have five models: HGM80, HGM90, HGM100, HGM125 and HGM1680
And the finished production fineness can be adjusted between 250 mesh to 3000mesh.
As for the capacity (ton/hour) ranges from 0.5t/h to 45t/h

http://www.clirikchina.com/news/Group_News/170.html

Related Websites:

http://www.limestonegrindingmill.in/

http://www.baritegrindingmills.com/

http://www.raymondmill.in/

http://www.gypsumgrindingmill.in/

Clirik Grinding Equipment Achieve Combination of Economic and Production Efficiency

Grinding mill equipment is an important part of mining machinery. Grinding mills, including Raymond Mill, high-pressure hanging roller mill, high-pressure micro-powder mill, ultra fine powder mill, three-ring medium-speed milling equipment and other large industrial mill, are not only used for the deep processing of raw materials in mineral, coal, electric power, chemical, building material, refractory material, metallurgy, water conservancy, building and highway, but also in railways, highways, Hydropower, municipal engineering and other construction to provide an efficient and reliable technology and equipment protection.

Among them, High-pressure grinding equipment is made with mature experience of research and development. Advanced surfacing technology, stable hydraulic system and the import of the United States, Switzerland carbide provide a technical guarantee for the efficient production of equipment, and it is the best grinding equipment for a large enterprise production choice for materials with different hardness of nearly 100 tons of output per hour. The latest technology, efficient production capacity, design concept with wide range of grinding grain size and energy-saving environmental protection, the application of high-pressure pulverizer truly realizes the combination of economic efficiency and production efficiency in the production process. The use of lower equipment investment will be able to bring greater production capacity.

There are two kinds of high-pressure grinding mills: high-pressure suspension roller mill and high-pressure micro powder mill. Among them, the high-pressure hanging roller mill is improved based on the traditional mill. To increase, improve the grinding fineness, and improve the grinding efficiency when ensuring the normal operation. And electrical consumption of high-pressure grinding mill is low, floor space is small, one-time investment is small, liked by more and more customers. The emergence of high-pressure micro-powder mill solves problems of high cost of air mill grinding, and has wider use than airflow mill. Under the same conditions, energy consumption of high-pressure micro-powder mill system is only 1/3 of airflow mill, the price is only 1/8 of it. Because of characteristics of energy-saving, low investment and high-income, High-pressure micro-powder mill more and more welcomed by the majority of customers.

http://www.clirikchina.com/news/Industry_News/167.html

Related Websites:

http://www.clirik.com/

http://www.clirikchina.com/

http://www.powder-mill.net/

http://www.grindingmill.in/